Trinity Max-FLO Industrial housings have 6 bar operating pressure as standard (other pressure design are also available). These housings can accommodate DOE & SOE spring seal assembly as standard design for quick removal of cartridge(s). ASME section Div 1 design code option availiable.
MOC | SS 304/L, SS 316/L, CS / CS with rubber lining , GRP, Duplex Steel, Monel®, Hastelloy ®. |
Bolt for Top Body Cover | Swing bolts (Std.) Bolts / Studs (ASTM A 193 Gr B7) & Nuts (ASTM AA194 Gr 2H) - optional, Quick Closure Clamp with Hydraulically assisted Davit - optional at extra cost |
O Ring | Nitrile, Silicone, Viton, EDPM, EPR |
Gauge Vent Connection | Standard (Pressure Gauge - optional at exira cost) |
Drain & Vent Port | Standard for all Housings |
Cartridge Range | 9.75" to 40" |